Introduction
BOLT SOLID PLATE
The DPH Engineering Bolt Solid Plate Fastening System produces a strong, sift-free splice with superior holding ability thanks to a combination of top-and-bottom plate compression and high-tensile-strength bolts.
WHY BOLT SOLID PLATE?
Mechanical fastener rating from 150 to 560 PIW (30 to 100 kN/m)
Belts from 3/16” to 5/16” (5 mm to 24 mm) thick
Pulley diameters from 12” to 48” (300 mm to 1220 mm)
Sift-free splice perfect for sand, gravel, crushed stone, and cement
Specially formed teeth penetrate belt carcass without damaging fibers
Piloted bolts for quick and easy installation
Available with rubber-covered top plates for increased impact protection and compatibility with conveyor components
INSTALLATION METHOD
Portable tooling
Choice of hand or power installation
Rip Repair Fasteners
3/16” to 7/16” (5 mm to 11 mm)
Minimum Pulley Diameter:
12” (300 mm)
Maximum PIW: 150 (30 kN/m)
Size 1
3/16” to 7/16” (5 mm to 11 mm)
Minimum Pulley Diameter:
12” (300 mm)
Maximum PIW: 150 (30 kN/m)
Size 140
3/16” to 7/16” (5 mm to 11 mm)
Minimum Pulley Diameter:
14” (360 mm)
Maximum PIW: 225 (40 kN/m)
Flexco Size 190
5/16” to 9/16” (8 mm to 14 mm)
Minimum Pulley Diameter:
18” (460 mm)
Maximum PIW: 375 (65 kN/m)
Flexco Size 1-1/2
7/16” to 11/16” (11 mm to 17 mm)
Minimum Pulley Diameter:
12” (300 mm)
Maximum PIW: 300 PIW (50 kN/m)
Flexco Size 2
9/16” to 13/16” (14 mm to 21 mm)
Minimum Pulley Diameter:
30” (760 mm)
Maximum PIW: 440 PIW (75 kN/m)
Flexco Size 2-1/4
9/16” to 1-3/16” (14 mm to 30 mm)
Minimum Pulley Diameter:
36” (920 mm)
Maximum PIW: 620 PIW (105 kN/m)
Flexco Size 2-1/2
3/4” to 1” (19 mm to 25 mm)
Minimum Pulley Diameter:
42” (1070 mm)
Maximum PIW: 450 PIW (75 kN/m)
Flexco Size 3
5/16” and over (24 mm and over)
Minimum Pulley Diameter:
48” (1220 mm)
Maximum PIW: 560 PIW (100 kN/m)