Introduction
Conveyor System & Accessories / Skirting Rubber
Product Description:
Skirting rubber is a general purpose rubber used mainly in the mining industry as a side skirt on conveyor belt systems to prevent the materials falling down.
It is available in full width slabs up to 2000 mm wide and also pre-cut skirting strips.
SR 60 : A general purpose grade of natural rubber used for many quarrying and mining applications in dust and spillage control.
SR 40-50 : A softer grade natural rubber, with good tensile and elongations properties, it is ideally suited for conveyor skirting applications where belting wear is of concern. The rubber is also used where a flexible, but abrasive resistant seal is required.
Specification :
Width: 76 — 2,000 mm
Thickness: 2 — 50 mm
Roll length: 3 — 30 m
Technical Data
|
Type |
Hardness (Shore A) ±5 |
Tensile Strength (Mpa) |
Elongation at break % |
|
Skirting Rubber |
70 |
2.5 to 6 |
300 |
