MSRT Tools
Lightweight Aluminum MSRT Installation Tool
The easy to use Aluminum MSRT tool now complements our Flexco® SR™ Fastening System with a focus on providing a lightweight, portable application tool. The Aluminum MSRT is designed to assist splice installers in harsh working environments where heavy splicing equipment has to be moved on a regular basis.
Aluminum MSRT, MSRT8 & MSRT9 Multiple Rivet Driving Tools
Designed for ease-of-use and portability to make multiple rivet driving simple and fast. The Aluminum MSRT tools hold the belt, fastener strip, and guide blocks securely in place allowing for a low profile, even tension finished splice. The Aluminum MSRT Applicator includes two SR700 Multiple Guide Blocks, two SR759 Multiple Drive Rods, two 4 lb. Hammers, Lubricant, and one Canvas Carry Bag.
MBRT Tools
Newly Designed Aluminum MBRT Tool Provides for Easier, Faster Installation of Flexco® Scalloped Edge™ BR™ Fasteners
Recommended for the most demanding high-tension applications, Flexco® BR™ Rivet Plate fasteners are now easier and faster to install with the newly designed Aluminum MBRT Installation Tool. Designed to improve installation time, the tool has a specially machined scalloped edge that eliminates the need for cumbersome clips and cam rod, allowing fasteners to nest securely on the bottom side of the belt. Plus, the enhanced clamp bar holds belt securely in place during installation without the need for additional nails or reinforcement.
Aluminum MBRT6 and MBRT10 Multiple Rivet Driving Tools
Newly redesigned multiple rivet driving tools allow for faster, easier installation of BR6 and BR10 fasteners. The aluminum MBRT tools hold the belt, fastener strip, and guide blocks securely in place. Using the drive rod, simultaneously drive and set rivets for a smooth, low profile splice. The Aluminum MBRT Applicator includes two Multiple Guide Blocks, Multiple Drive Rod, 4 lb. Hammer, Bridge Removal Tool, and Lubricant.
BSP Tools
Flexco® BOLT SOLID PLATE Fastening System
Installation Tools and Supplies
The only tools needed for Bolt Solid Plate fastener installation
are a templet and portable hand or power tools such as wrenches and belt punches. Impact wrench driven power tools are recommended and can reduce installation time by at least 50%.
Flexco-Lok® Tape= Rigid nylon tape helps eliminate belt ripples on plied or solid-woven belting so belts run smoothly over pulleys and under cleaners. Also helps seal splices against seepage of fines and moisture.
Cracking Chisel = With a hammer and cracking chisel, individual worn plates can be easily replaced – without resorting to replacement of the entire splice.
R2T Tools
The economically priced R2 fastener application tool is lightweight and portable, so it is ideal for quick repairs. The six-pound R2T tool installs up to 12” (300 mm) of R2 fasteners in one pass. For wider belts, simply move the tool over. For use with standard SR self-setting rivets and a two-pound hammer
