Electromagnetic Feeder
Syntron Electromagnetic Feeder Supplier | Electromagnetic Feeders | Electromagnetic Vibratory Feeder | Electromagnetic Vibrating Manufacturer In India.
Introduction
Syntron® Heavy Duty Electromagnetic Feeder increase bulk handling productivity with controlled high feed rates that improve cost-per-ton handling efficiency. These versatile Electromagnetic Vibrating Feeder are capable of handling a variety of materials from the finest powders to large, coarse particles. They are available in ten different models with capacities ranging from 25 to 1600 tons per hour, based on dry sand weighing 100 pounds per cubic foot. Capacities vary depending on drive unit location, material characteristics, material density, trough length and width, trough liner type, feeder installation, skirt boards, and hopper transitions.
Syntron® Electromagnetic Feeder requires minimal maintenance, as there are no mechanical parts to wear out such as cams, eccentrics, belts, and bearings, thus eliminating the need for lubrication. All movement is confined to the heavy-duty leaf springs. Electrical components, such as the coil, will provide years of service under normal operating conditions. Dust-tight drive units are standard on all models.
Dependable, flexible controls provide easily adjustable feed rates with instantaneous response. A variety of controls with special control arrangements are available.
Electromagnetic Feeder Features
Dust-tight and maintenance-free drive units
Above- or below-deck drive units
Two-mass, spring-connected, sub-resonant tuned
High frequency – 3600 VPM at 60Hz
Stroke – 0.060 inches
Stroke generated by creating a magnetic field
Suspension mount, base mount or combination of both
Bolt-in replacement trough liners
Multiple-drive unit feeders available
