F Series Feeders

Introduction

Syntron® F-Series Feeders are designed for robust feeding, high head loads, stability and tuneability. These little feeders deliver big performance.

Feeder Models and Specifications

Model F-T0

Syntron® FT-0 feeder with standard 1-1/2 x 12-inch trough has a maximum
capacity of 1,250 pounds per hour. This dependable Series feeder is ideal for
applications demanding top performance at budget prices. Common applications
include metering small quantities of dry materials or conveying small parts.

Model F-T01

Syntron F-T01 feeder with standard 3 x 18-inch flat pan trough has a maximum capacity of two tons per hour. Wider troughs handle larger capacities.

Model F-T02

The Syntron® F-T02 feeder comes with all the standard features and benefits
you’ve come to rely on from Syntron light capacity feeders, PLUS a higher stroke
(.090 inches) that yields twice the travel speed of other Syntron units. The F-T02
is ideal for a whole range of applications, including high-stroke scale feeding, hard to feed materials, and traditional bulk feeding from hoppers. The Syntron F-T02
feeder with standard 6 x 18-inch flat pan trough has a maximum capacity of ten tons per hour. Wider troughs handle larger capacities.

Feed rate based upon granular material weighing 100 pounds per cubic foot and feeder with standard flat pan.
Height E and H with standard coil spring mount. For other mounting options, see Available Rubber Mountings chart on page 16.
Unit can be ordered to operate from virtually any commercial power supply up to 230 volts. A step-down transformer is required when
operating voltage is 460 volts. Please specify the voltage required and either 50 or 60 Hz at time of order.
Other trough sizes are available. Contact the factory for assistance.

Model F-T010

Syntron® F-010 feeder with standard 5 x 20-inch trough has a maximum capacity
of four tons per hour.

Feed rate based upon granular material weighing 100 pounds per cubic foot and feeder with standard flat pan.
Height H with standard cushion rubber mount. For other mounting options, see Available Rubber Mountings chart on page 16.
Unit can be ordered to operate from virtually any commercial power supply up to 230 volts. A step-down transformer is required when operating
voltage is 460 volts. Please specify the voltage required and either 50 or 60 Hz at time of order.

Model F-T152

With a capacity of 12 tons per hour, the Syntron® F-152 feeder carries heavier
troughs and greater head loads than smaller models such as model BF-2. This
unit is commonly used in blending, mixing and packaging operations in industries
such as glass and plastic applications. Base or suspension mounting is available,
and above-deck drives are an option.

Feed rate based upon granular material weighing 100 pounds per cubic foot and feeder with standard flat pan.
Unit can be ordered to operate from virtually any commercial power supply up to 575 volts. Please specify the voltage required and either
50 or 60 Hz at time of order.
Other trough sizes are available. Contact the factory for assistance.

Model F-212

Syntron® F-212 feeder offers the same design features as model F-152,
but with a maximum capacity of 20 tons per hour.■ This proven, rugged unit
is ideal for heavy-duty applications. Model F-212 can be supplied with either
base or suspension mounting. Above-deck drives are an option.

Feed rate based upon granular material weighing 100 pounds per cubic foot and feeder with standard flat pan.
Unit can be ordered to operate from virtually any commercial power supply up to 575 volts. Please specify the voltage required and either
50 or 60 Hz at time of order.
Other trough sizes are available. Contact the factory for assistance.