Introduction
A scaled-down version of the original DualDrive tooth geometry.
Standard belt width – 2032mm/80″
Standard belt width – 2032mm/80″
Volta Belting Mini Dual Drive positive drive belts lower the cost of ownership due reduced consumption of water and chemicals, reduced maintenance and sanitation costs and reduced downtime. Lower bacteria counts deliver a significantly more hygienic product with improved shelf life.
Available in two thickness (3mm or 4mm) and varying hardnesses (Shore 55D, 53D): food-grade blue and beige and a special Low Temperature (LT) version for deep freeze applications (Shore 95A, 46D).
Available in two thickness (3mm or 4mm) and varying hardnesses (Shore 55D, 53D): food-grade blue and beige and a special Low Temperature (LT) version for deep freeze applications (Shore 95A, 46D).
Material Features
- Smooth and textured belt surfaces
- No fraying, delamination or detaching of flights, compared with coated plied belts
- No fragmenting or chipping, compared with modular belts
- No crevices or links that harbor bacteria
- Easily and effectively cleaned
Mechanical Benefits
The DualDrive conveyor belt is a positive drive conveyor belt with a series of teeth extruded at a pitch of 50mm (2”) across the entire width of the underside. The teeth engage in a toothed drive sprocket that drives the conveyor belt with little or no pretensioning. DualDrive belts replace 2” pitch modular belts with minimal retrofitting.
- No seams, finger splicing, pins and hinges
- Extruded in 30m or 60m (100ft or 200ft) lengths
Related Products:
